Document Outline

• 1.INTRODUCTION
  • 1.1. Use of this Document
  • 1.2. Related Documentation
  • 1.3.Compatibility Statement
• 2.DESIGN GUIDE
  • 2.1.Hardware Requirements
  • 2.2.Software Requirements
  • 2.3.Utilities
    • 2.3.1.IO_MERGE
    • 2.3.2.CE_MERGE
• 3.DESIGN REFERENCE
  • 3.1.Program Memory
  • 3.2.Data Memory
  • 3.3.Programming of the 71M651X Chips
  • 3.4.Test Tools
    • 3.4.1.Running the 651X_Demo.hex Program
    • 3.4.2.Complete List of CLI Commands
      • Command Overview
      • Detailed Command Descriptions
    • 3.4.3.Command (Macro) Files
• 4.TOOL INSTALLATION GUIDE
  • 4.1.Installing the Programs for the ADM51 Emulator
  • 4.2.Installing the Wemu Program (Chameleon Debugger)
  • 4.3.Installing the ADM51 USB Driver
  • 4.4.Installing Updates to the Emulator Program and Hardware
  • 4.5.Creating a Project
  • 4.6.Installing the Keil Compiler
  • 4.7.Creating a Project for the Keil Compiler
    • 4.7.1.Directory Structure
    • 4.7.2.Adjusting the Keil Compiler Settings
    • 4.7.3.Manually Controlling the Keil Compiler Settings
  • 4.8.Project Management Tools
  • 4.9.Alternative Compilers
  • 4.10.Alternative Editors
• 5.Demo Code Description
  • 5.1.80515 Data Types and Compiler-Specific Information
    • 5.1.1.Data Types
    • 5.1.2.Compiler-Specific Information
  • 5.2.Program Flow
    • 5.2.1.Startup and Initialization
  • 5.3.Basic Code Architecture
    • 5.3.1.Initialization
    • 5.3.2.Foreground
      • TIMER Interrupt
      • CE_BUSY Interrupt
      • XFER_BUSY Interrupt
      • SERIAL Interrupt
    • 5.3.3.Background Tasks
      • CE Update
      • Display CE
      • Command Line Interpreter
      • Auto-Calibration
      • CE Default Calibration
      • Command Pending
      • EEPROM Read/Write
      • Pulse Counters (Revision 3.05)
    • 5.3.4.Watchdog Timer
    • 5.3.5.Real-Time Clock (RTC)
  • 5.4.Data Flow
  • 5.5.CE/MPU Interface
  • 5.6.Source Files
  • 5.7.Auxiliary Files
  • 5.8.Include/Header Files
  • 5.9.CE Image Files
  • 5.10.Common MPU Addresses
  • 5.11.Firmware Application Information
    • 5.11.1.Sag Detection
    • 5.11.2.Temperature Measurement
    • 5.11.3.Temperature Compensation for Measurements
    • 5.11.4.Temperature Compensation for the RTC
  • 5.12.Validating the Battery
  • 5.13.Alphabetical Function Reference
  • 5.14.Errata for Demo Code Revision 3.04
  • 5.15.TEST Modules
    • 5.15.1.6513 CE Example
    • 5.15.2.Serial Port Tests
    • 5.15.3.Timer Tests
    • 5.15.4.EEPROM Tests
    • 5.15.5.Generating DIO Pulses on Reset
    • 5.15.6.Testing the Security Bit
    • 5.15.7.Software Timer Test
    • 5.15.8.Interrupt Test
    • 5.15.9.RTC Test
    • 5.15.10.LCD Test
• 6.80515 REFERENCE
  • 6.1.80515 Overview
    • 6.1.1.80515 Performance
    • 6.1.2.80515 Features
  • 6.2.80515 Architectural overview
    • 6.2.1.Memory organization
      • Program Memory
      • External Data Memory
      • Dual Data Pointer
      • Internal Data Memory
      • Special Function Registers Location
      • Generic Special Function Register Overview
      • Generic Special Function Registers Location and Reset Values
      • Special Function Registers Specific to the 651X
    • 6.2.2.The 80515 Instruction Set
      • Instructions Ordered by Function
      • Instructions Ordered by Opcode (Hexadecimal)
      • Instructions that Affect Flags
  • 6.3. 80515 Hardware Description
    • 6.3.1.Block Diagram
    • 6.3.2.80515 MPU
      • Accumulator
      • The B Register
      • Program Status Word (PSW)
      • Stack Pointer
      • Data Pointer
      • Program Counter
      • Ports
      • Timers 0 and 1
      • Timer/Counter Mode Control Register (TMOD)
      • Timer/Counter Control Register (TCON)
      • Allowed Combinations of Operation Modes
    • 6.3.3.Serial Interface 0 and 1
      • Serial Interface 0 Modes
      • Serial Interface 1 Modes
      • Baud Rate Generator
    • 6.3.4.Software Watchdog Timer
      • Software Watchdog Timer structure
      • WD Timer Start Procedure
      • Refreshing the WD Timer
      • Special Function Registers for the WD Timer
    • 6.3.5.The Interrupt Service Routine Unit
      • 6.3.5.1. Interrupt Overview
      • 6.3.5.2. Special Function Registers for Interrupts
      • 6.3.5.3. Interrupt Priority Level Structure
      • 6.3.5.4. Interrupt Sources and Vectors
      • External Interrupt Edge Detect
• 7.ACRONYMS