MF Digital Cougar 6600 Manual - Manual (Page 13)

Important notes for relay mode:
If you load a single job – that is 1 master followed by any
amount of blanks, Cougar will detect a single job as it
attempts to load a new master and finds none. In that case,
the following screen will show:
To end the job mode at that stage, simply press ‘Stop’.
If you wish to add further jobs, load more blanks to create
further copies of this job, or simply load [master2][blanks]
in the input bin for additional jobs and press ‘Start’.
If Cougar detects a defective master at any stage of relay
mode, it will remove master and blanks to the reject stack
and show the following display:
Pressing ‘Start’ will proceed with the next job.’Stop’ will
abort:
You will now be returned to the main Copy/Compare Screen
• If you push the “Stop/No” button, the screen will now read:
• The ERASE ONLY option let you erase your CD-RW or DVD-
RW discs using the loader. This is useful if you utilize rewritable
discs often and have many to erase.
• You will now be returned to the Main operating screen, “Select
Copy or Compare”. To use any of these features, push the
Page 13