MF Digital Cougar 6600 Manual - Manual (Page 5)

• Press the “0” key on the keypad. The screen will now read:
• The factory setting for this function is “Copy”. The “Simulate”
mode is useful as a diagnostic tool and is used mainly for support
issues. It is also helpful for training purposes to experiment with
various system functions.
• Press the “1” key to select “Copy” or the “2” key to select
“Simulate”. After pressing either key, you will be returned to the
main operating screen.
• Press the “1” key on the keypad. Something similar to the
following will be displayed on the screen in sequence:
• As indicated by the red square, this is the version information of
the firmware currently installed on the Cougar 6600.
• This displays the image size on the internal hard disk, time and
date.
Page 5