MF Digital OptiEC Inkjet Manual - Manual (Page 30)

OptiPrinter CD/DVD Inkjet Printer
ZZ 004 805 - 30 -
Corner Height: To adjust the corner height of the mask for CD business
cards
Corner Width: To adjust the corner width of the mask for CD business
cards
Hub Area Settings:
To print on the hub of your chosen media, first check the “Printing on Hub” checkbox as
shown in Fig. G.
The mask interface displays the hub.
Once again the Outer & Inner diameters of the hub can be adjusted to fit your media’s
requirements exactly. See Fig. E, pg 24.
Mask Origin:
The mask origin refers to the position of the mask in relation to the actual printer page itself
and is used to centralize the mask on the page.
As explained previously, the OptiPrinter has a set page size of 124 mm x124 mm, and by
default, the mask sits in the center of this page. The center of the mask sits on the 62mm point
of the X & Y axis, while the origin of the mask (the top left hand corner) sits on the on the 1 mm
x 1 mm point of the X & Y axis (see Fig. I and Fig. J on the next page)
Hub
Fig. H
Fig. G
Fig. I