MF Digital OptiEC Pro 6 - Manual (Page 11)

I In nk k C Ca ar rt tr ri id dg ge es s a an nd d P Pr ri in nt ta ab bl le e M Me ed di ia a 7 7
D. PRINTING A SELF TEST
Now that the printer is set up and print supplies are loaded, a
self test should be performed to check for proper operation of
the printer.
1. If power is ON, turn it OFF now using the Power button.
The Power light should be OFF. Verify that print supplies
are installed and close the printer's Disc Tray.
2. With the printer’s front cover shut, press and hold the
Disc Tray button as you turn the printer power ON.
3. Continue to hold the Disc Tray button down for a few
seconds, until you hear the self test begin to print.
E. REPLACING OR SWITCHING INK CARTRIDGES
Once you begin using your OptiEC Pro Printer 6 on a regular
basis, you will eventually need to replace an empty ink
cartridge. Please refer to the following steps:
1. With the Disc Tray closed, open the printer’s front cover by
pulling down on its top-left corner.