MF Digital Signature Pro Inkjet - Manual (Page 9)

Adjusting the Signature PRO Printer Driver Settings
CAUTION
Always use properly grounded receptacles, or severe damage to your system
may result. The use of a surge protector or Uninterruptible Power Supply
(UPS) is highly recommended.
Starting Up
• Flip the SCRIBE EC power switch to the on position.
• Switch on the power to the CD/DVD drive tower.
•
Switch on the power to the printer.
CD/DVD Tower and Printer Alignment
On the following pages, you will find step-by-step instructions for aligning the CD/DVD tower and printer.
Please follow the steps in order to ensure proper alignment of the CD/DVD tower and printer. Improper
alignment of the CD/DVD tower and/or the printer can cause problems in the CD/DVD duplication cycle.
Printing Preferences
To change the printing preferences for the Signature
PRO printer, please do the following:
1. Go to Start-> Settings -> Printers
2. Right-click on the CD Color Printer PRO
printer in the Printers Folder
3. Go to Printing Preferences
4. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
5. To save settings, click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Printer Spooling
It is important to disable printer spooling on the
Signature PRO printer. To do so, please follow the
steps below:
1. Go to Start-> Settings -> Printers
2. Right-click on the CD Color Printer PRO
printer in the Printers Folder
3. Go to Properties
4. Go to the Advanced Tab
5. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
6. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***
Page 9