MF Digital Rimage Prism Plus Thermal - Manual (Page 10)

Page 10
Director EC Office Publisher
with Prism PLUS Printer
Installation Guide
Document Revision: 12/28/2004
Selecting system drives and Prism PLUS printer for Director EC
1. Execute the Director EC 3.00
program.
2. When the Director EC software
is executed for the first time it
might prompt the “System
Drives Missing” message. Click
OK to proceed.
3. Next, go to “System Setup” tab
and select system drives “D and
E” Depending on systems
configuration system drive
letters might differ. (fig. 1)
4. Select the Rimage Perfect Image
Printer PF.
5. Make sure the Skip Alignment
Spindle option is checked.
6. Finally, click the Apply button
and restart the Director EC
program.
System Setup tab
(fig. 1)
Rimage Perfect Image
Printer PF
***Do not select drive C: as
a system drive ***
Note: