MF Digital Rimage Prism Plus Thermal - Manual (Page 9)

Page 9
Director EC Office Publisher
with Prism PLUS Printer
Installation Guide
Document Revision: 12/28/2004
Adjusting the Prism Plus Printer Driver Settings (cont.)
Device Settings
7. Go to Start-> Settings -> Printers
8. Right-click on the Rimage Perfect Image
Printer PF printer in the Printers Folder
9. Go to Properties
10. Go to the Device Settings Tab
11. For the Scribe Program to use the
printer effectively, please match the
settings of your printer driver to the
example on the right-side of this page.
a. Installed ribbon setting depends
on ribbon used.
12. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be
sure to create a NEW PRN file.***