MF Digital SCRIBE SA 3000 - Manual (Page 30)

Scribe SA Standalone Series Operator’s Guide Document Revision: 05/31/06
Page 30
Aligning the Printer – If Needed (Pre-aligned at Factory)
• After the system reboots, the main operating screen will be depicted
below:
• Press the “4” key. You will be prompted to “Import PRN files”. Press
“Stop/No” to advance to the next option.
•
Next you will be prompted to “Start Loader Test”. Press the “Stop/No”
button to advance to the Printer Alignment option.
• You will then be prompted to enter the “Printer Alignment” feature, as
depicted below:
• Press the “Start/Yes” key to enter the “Printer Alignment” feature.
• Place a CD in the input area and press the “Start/Yes” key.