MF Digital SCRIBE SA 3000 - Manual (Page 66)

Page 66
Utilizing the Scribe SA Standalone Series Client
The Scribe SA Standalone series has a client feature which enables a
remote user.
Configuring the Scribe SA Standalone Series
• Connect the Scribe SA Standalone Series to your network using the
RJ-45 connector on the back of the system.
• Turn on the Scribe SA Standalone Series
• Wait for the Scribe SA Standalone Series to boot up, you will see:
• Press the “7” key, you will see:
• Press the “START/YES” key, you will see:
• You must leave “MF” at the front of the name. You should name it
“MF001” for example.
• Press the “START/YES” key, you will see: