MF Digital CD-QuadraPRO (Rev: 08/01/02) - Manual (Page 16)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 QuadraPRO LX Operator’s Guide
Document Revision: 080102
Page 15
• Make sure you power on the unit using the primary and secondary
power switches located on the back of the QuadraPRO.
• Once the proper voltage setting has been confirmed, it is time to turn on
the unit. The power switches are located at the back of the unit. Wait a
minute or two while the system starts up. The screen will now read:
M F I N C .
D U P L I C A T I O N M A D E E A S Y
After the startup routine is complete, a series of self-diagnostics will be
performed. The screen will now read in sequence:
I N I T I A L I Z I N G S Y S T E M
Once complete, the unit will display the main operating screen:
S E L E C T C O P Y O R C O M P A R E