MIDI Solutions Footswitch Controller - Manual (Page 9)

9
SYSTEM EXCLUSIVE
NOTE-ON FILTER
To program the Footswitch Controller to send out a System Exclusive message when the footswitch is depressed,
send it the following System Exclusive Programming commands:
followed by
where is the System Exclusive message the Footswitch Controller is being programmed to send
All bytes must be in Hexadecimal format (see hexadecimal conversion table at end)
To program the Footswitch Controller to send out a System Exclusive message when the footswitch is released, send
it the following System Exclusive Programming commands:
followed by
where is the System Exclusive message the Footswitch Controller is being programmed to send
All bytes must be in Hexadecimal format (see hexadecimal conversion table at end)
To program the Footswitch Controller to send out the MIDI Machine Control command (F0 7F 7F 06 02 F7)
when the footswitch is depressed, and the MIDI Machine Control command (F0 7F 7F 06 01 F7) when the
footswitch is released, send the Footswitch Controller the following System Exclusive Programming commands:
F0 00 00 50 04 06 F7 followed by
F0 00 00 50 04 06 F7 followed by
To program the Footswitch Controller to filter Note-On messages on a selected MIDI channel when the footswitch is
depressed, send it the following System Exclusive programming command:
= MIDI channel (see MIDI channel table at end)
= : Send All-Notes-Off on depression of footswitch, do not send All-Notes-Off on depression
To start filtering Note-On messages depress the footswitch (the All-Notes-Off message is sent out at this time), to
stop filtering release the footswitch.
F0 00 00 50 04 06 01 F7 F0 ... F7
F0 ... F7
(max. 20 byes)
F0 00 00 50 04 06 00 F7 F0 ... F7
F0 ... F7
(max. 20 byes)
Example
01 F0 7F 7F 06 02 F7
00 F0 7F 7F 06 01 F7
F0 00 00 50 04 0C cc aa F7
cc
aa 01 aa = 00:
Play
Stop