Clarion DXZ855MP - Manual (Page 25)

280-8189-00
English
DXZ855MP
25
Sound Adjustment
Note:
When "1", "2", "3", or "USER" is selected for ADF
(Anti Distortion Filter), setting of MAGNA BASS EX
cannot be performed.
Adjusting the sub-woofer
• "SW VOLUME" (sub-woofer) can be adjusted
only when the "SUB-WOOFER" is set to "ON"
(cf. page 32).
• The factory default setting for SW VOLUME is
“0”.
1. Press the [SOUND] button.
2. Touch [SW VOLUME].
SW VOLUME
RTN
0
3. Touch on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
4. Press the [SOUND] button to return to the
original mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
2. Touch [BASS].
3. Touch on the left of the display to
select the item.
Each touch of switches the
adjustment items as follows:
GAIN
➜ FREQUENCY ➜ Q ➜ GAIN...
4. Touch on the right of the display to
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +8)
∗ The factory default setting for
"FREQUENCY" is "50". (Adjustment 50/
80/120Hz)
∗ The factory default setting for "Q" is "1".
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
Adjusting the treble (Gain,
Frequency)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
2. Touch [TREBLE].
3. Touch on the left of the display to
select the item.
Each touch of switches the
adjustment items as follows:
GAIN
➜ FREQUENCY ➜ GAIN...
4. Touch on the right of the display to
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +6)
∗ The factory default setting for
"FREQUENCY" is "12k". (Adjustment
8kHz/12kHz)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjusts the volume balance between the front
and rear speakers.
• The factory default setting for BALANCE is
“0” and for FADER is “0”.
1. Press the [SOUND] button.
2. Touch [BALANCE] or [FADER].
BALANCE
RTN
0
3. Touch on the right of the display and
adjust the item as desired.
∗ “BALANCE” can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ “FADER” can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
4. Press the [SOUND] button to return to the
original mode.
+DXZ855MP_01-24-Eng.p65 05.1.18, 0:09 PM 25