Clarion DXZ855MP - Manual (Page 33)

280-8189-00
English
DXZ855MP
33
3. Touch on the left of the display to
select “AMP CANCEL”.
RTN
AMP O F F CANCEL
ADJ SOUND
4. Touch on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Displaying the Sirius ID No.
(SID DISP)
• This item can be set only when Sirius is
connected.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [TUNER].
3. Touch on the left of the display to
select “SID DISP”.
RTN
S I D D I S P 1 2 3 4 5 6
ADJ SOUND
4. Touch on the right of the display to
switch between the display for the upper 6
digits and the lower 6 digits.
5. Press the [ADJ] button to return to the
original mode.
AUX function
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
Setting the input level (AUX
SENS) of portable audio (AUX
mode)
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is “MID”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select "AUX SENS".
RTN
AUX SENS M I D
ADJ SETTING
4. Touch on the right of the display to
set the input level.
∗ Select LOW, MID or HIGH.
Notes:
• When the input level is overloaded, “OVERLOAD”
appears. Adjust AUX SENS or the input level so
that “OVERLOAD” disappears.
5. Press the [ADJ] button to return to the
original mode.
Performing a system check
(SYSTEM CHECK)
This function allows you to perform a system
check when an external equipment is connected
to this unit.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch on the left of the display to
select “SYSTEM CHECK”.
RTN
SYSTEM CHECK [START]
ADJ SETTING
4. Touch [START].
The confirmation display appears.
5. Touch [OK].
ADJ SETTING
OK CANCEL
After this operation, the display returns to
the original mode.
Common Operations
+DXZ855MP_01-24-Eng.p65 05.1.12, 5:19 PM 33