MUTEC MC-1.2 - Manual (Page 9)

9
Installation
General Recommendations for Interface Wirings
AES/EBU & S/P-DIF Interconnections
When working with XLR-based AES3/-11 or RCA-based S/P-DIF audio signals at high sampling rates , well-shielded electrical
cables are mandatory to avoid increased radiation! Standard cables are normally useable for sampling rates up to 50.0kHz.
When interconnecting the optical S/P-DIF interfaces with plastic fiber cables, lengths of 10 meters should not be exceeded,
to ensure reliable transmission of your digital audio signals. Glass fiber cables may transfer data reliably even over greater
distances while keeping the signal’s performance on a much higher level than plastic fibre cables can do during transmission!
Information
MUTEC offers optical cables of various lengths that have been specifically tested for the transmission of ADAT™ and S/P-DIF
signals. Ask your local dealer for such cables!