MUTEC MC-7 - Manual (Page 9)

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
\
B E D I E N E L E M E N T E B E D I E N E L E M E N T E B E D I E N E L E M E N T E
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
CONTROL ELEMENTS AND TERMINALS
MC-7 Front Panel
1 POWER
This red LED lights up when the unit is switched on with the rear panel
POWER switch.
2 MENU
This key selects one of the available function menus.
3 SELECT
Use this key to select a function within a specific function menu.
4 REFERENCE
This function menu allows to select all acceptable input reference signals
for distribution or conversion. Furthermore, every input reference is avail-
able with two additional options: the »HOLD« function and the »REF PASS«
function. See details in chapter OPERATING THE MC-7.
5 CLK MULTIPLIERS
This functional menu lets you determine the factor by which the basis clock
rate of the incoming reference signal is multiplied additionally. This setting
can be made individually for every Word Clock pair of outputs as well as for
the AES/EBU and S/P-DIF outputs.
6 STATUS
This menu indicates various signal statuses of the incoming reference or
digital audio signal.
7 CLOCK IN
This menu indicates the clock rate of the incoming reference signal. Audio
Clock rates between 32.0kHz and 192.0kHz can be analysed and displayed.
8 WCLK OUT 4
This pair of Word Clock outputs transfers either all standard Word Clock
rates as well as Word Clock x 256 for older Digidesign ProTools™ systems. Its
numbering is aligned to the functional menu »CLK
MULTIPLIERS « on the front
panel. For adjusting these outputs see chapter OPERATING THE MC-7.
9
Refer to the OPERATIONS chapter for more
information.
4
3 2 1 5 6 7 8