Nixeus NX-VUE27D - Manual (Page 3)

Important Information
Important Note:
Please make sure your computer hardware and graphics card supports the Nixeus Vue 27” IPS Monitor. Some
devices and connections may not be able to support the full 2560x1440 resolution. Avoid using 3rd party cable
adapters/convertors to connect the NX-VUE27D to HDMI, VGA, and DVI output devices - we cannot guarantee
they will be compatible with the NX-VUE27D. If you are not sure, please contact your computer hardware’s
manufacturer. Please read this manual before using the Nixeus Vue 27” NX-VUE27D with your computer. It
contains important information regarding the use and care of IPS Monitors.
Safety and Maintenance:
1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.
2) Remove or secure any objects that may fall into the monitor’s vents. Do not obstruct or block the cooling vents of
the monitor.
3) Don’t jam the vents on the enclosure.
4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.
5) When disconnecting the power cord or DC power line for the monitor, please wait for 6 seconds before
reconnecting the power cord or DC power line wires for normal operation.
6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are
missing, please contact Nixeus for a replacement. Using un-authorized power connectors may damage your monitor
and void your warranty.
7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not over-
clock or modify the monitor’s decoder board. Please do not apply excessive force to the LCD panel or drop the
monitor. Warranty does not cover physical damages, over-clocking, and modifications to the monitor.
8) When monitor is not in use for a long period of time, please disconnect the power plug.
9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do not
use organic solvent, alcohol, or ammonia liquid to clean the monitor.
10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and to
prevent monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets wet,
please wipe clean with soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor, please
disconnect power adapter immediately. For service please contact Nixeus Technical support for service and repair at
[email protected]
11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum
conditions: Temperature = 0-40 degrees Celsius (32°-95° Fahrenheit), Humidity = 20-80% RH
3