Nixeus NX-VUE27D - Manual (Page 4)

Avoiding Image Persistence, Incidental Image or After Image:
1) When the monitor is on and unattended, please use a moving screen saver. If there is a static (non moving image)
on the screen, please refresh regularly or start an application to start using the screen.
2) Long time continuous display of static images may case a “brand” on the screen; this is also cal “image
persistence” or “incidental image” or “after image.” “Brand,” “incidental image” or “after image” is a common
phenomenon of LCD Panel Technology. In most cases, after turning off the power supply for a certain amount of
time the “brand,” “incidental image” or “after image” will gradually disappear. Also by displaying a pure white image
for the entire screen for the same duration that you had the static image that caused the image persistence may
remove the image persistence. Please contact Nixeus if you need assistance in removing image persistence.
CAUTION: Serious “brand,” “incidental image” or “after image” will not disappear and cannot be repaired. This type
of damage is not covered by warranty. Please take good care of your monitor to prevent serious “brand,” “incidental
image” or “after image.”
Larger IPS monitor panels may have some glow around the edges or corners. This is known as back light bleed and
IPS Glow - this is normal due to the IPS (In-Plane-Switching) technology that allows more light, better viewing
angles and higher brightness to produce more vibrant colors and brighter pictures.
If your monitor needs replacement parts, warranty service, and repairs please do not attempt to do it yourself!
Doing so may void the warranty. Please contact [email protected] for warranty support. For more
information please visit www.nixeus.com
4