NORAC UC4.5-BC-RG6 - Manual (Page 23)

20
5. In the electrical panel towards the front of the sprayer, wire the white wire on C30 to
+12V and the black wire to Ground. Refer to Figure 15 for recommended +12V and
Ground connections inside of the electrical panel.
Figure 15: Power and Ground Connections
5. Route P12/P6 of C10 out of the cab using the knockout in Access Panel 2 (Figure 16).
6. Connect R12/R6 of C11 to P12/P6 of C10 outside of the cab.
BOTTOM TOP (view from cab)
Figure 16: Cable Routing Through Knockout
Connect Ground
Wire Here
Connect +12V
Wire Here