NORAC UC4.5-BC-RG6 User Manual
Page 25
Advertising
22
Figure 18: Sprayer Valve Block Connections
12. Connect the valve interface cable (C03) to connector S6 on the valve extension cable
(C11).
13. Connect the 2-pin connectors on the valve interface cable to the NORAC valve block, as
shown in Figure 19.
14. The connectors on the valve cable (C03) are marked RIGHT UP, LEFT UP, RIGHT
DOWN and LEFT DOWN. Cables labeled with UP go on the same side as the
hydraulic hoses.
Figure 19: Valve Cable Connections
Advertising
This manual is related to the following products: