NOYAFA NF-8208 - Manual (Page 12)

Test Result 3: Abnormal pair and length (PAIR &LENGTH) display
It will display the paired lines first if there is unpaired lines in the pair and
length (PAIR & LENGTH) measurement:
P a i r 12 100.0m
78
P a i r 36 100.3m
P a i r 45 100.2m
In which, the last line (78 ) indicates there is no pair in lines 7and 8, at
the moment, it will display the length of unpaired line number(as shown below):
It will display "X" to indicate an open circuit if the length is less than 90%of
other line pair length and the open circuit is located at around 89.3M from
the tester. (The open circuit line number could be rechecked by
WIREMAP function.)
P i n 7 100.0m
P i n 8 89.3m x
Note: NF-8208 can not check the wiremap of coax cable and telephone
cable directly, it needs RJ11 cable adaptor and BNC cable adaptor.
(The tester is incapable to know the exact location of short circuit.)
At the moment, push key to restart test or push key to return the
main menu.
Always eliminate short circuit and then start further measurement.
Test Result 2: Normal pair and length (PAIR &LENGTH) display
P a i r 12 100.0m
P a i r 78 99.8m
P a i r 36 100.3m
P a i r 45 100.2m
At the moment, push key to restart test or push key to return the
main menu.
PAIR&L
It will display as follows if pair and length(PAIR & LENGTH) measurement is
in normal condition:
PAIR&L
Your excellent helper in cable test! 09