NOYAFA NF-308 - Manual (Page 8)

NetWork
Cable Tester
1.wiremap
2.pair&length
3.coax/tel
4.setup
Product operation methods
Bott Screen:
Carry out self-checking at the same time (The dotted line dynamically displays
the course of self-checking from left to right):
Wait 5 seconds or push any arbitrary key to display main menu.
Main menu display:
PAIR&L
Wiring diagram (WIREMAP) test function:
After entering the wiring diagram (WIREMAP), the tester shall
carry out wiring diagram (WIREMAP) test and displays as follows
----T e s t i n g ----
There are four functions to be chosen on main menu.
1. WireMap --- Wiring diagram measurement to check end-to-end continuity
of cables in M, L, R and locate errors.
2. Pair & Length ---Pair and measure length to know open,short,points, verify
cable length,open circuit distance.
3. Coax/Tel --- Coaxial cable and telephone line .
4. SETUP---Calibrate and set up the tester (Refer to description hereinafter).
With main menu display, push key to move cursor
indicator up
and down to desired item and then push key to enterrelated test
function accordingly.
Note:never put a telephone cable into RJ45 Port especially a charged one,
for fear of burnout to the tester.
12345678...
05 Your excellent helper in cable test!