NOYAFA NF-308 - Manual (Page 9)

Test Result 1: Short circuit (SHORT)
It displays as follows if there is any short circuit in cable or terminal: (e.g.12
short circuit in the sample)
Short:
12
At the moment, push key to restart testing or push key to return main
menu.Always eliminate “short”error firstly and then start further measurement.
Test Result 2: It will display as follows if the far-end of cable to be checked
does not insert into the far-end matcher (ID) or if the cable does no insert
into the local port(L)
No adapter:
At the moment, push key to restart testing or push key toreturn
main menu.
Test Result 3: Normal wiring diagram (WIREMAP) display
The tester will automatically detect far-end matcher (ID) or local port (L)cable
and it will display wiring diagram (WIREMAP) as follows if it finds the
far-end matcher (ID) or cable to be checked in the local port(L):
Wire map:pass
R: 12345678 id1
Iiiiiiii
M: 12345678
"R" means “Remote tester” , "ID1"is the number of Remote identifier .
"|" is the connecting line between “R” and “M”.
"M:" means “Main tester”.
At the moment, push key to restart testing or push key to return
main menu.
PAIR&L
PAIR&L
PAIR&L
06 Your excellent helper in cable test!