NOYAFA NF-HDMI-II - Manual (Page 17)

Your excellent helper in cable test! 16
Master unit with Remote unit fast continuity
scan testing function:
1.Press “ TEST” button during the slow continuity scan
testing, or press three times“ TEST” button after the
automatic testing LEDs are off：It will fast scan pin
1~19pin and Shield，Master unit and Remote unit both
#1~19 and Shield LEDs will light up in sequence fast and
sustained repeated automatic scan.
2.The test result please refer to the slow continuity scan
testing function. (Fig 7. ~ Fig 10.)
Master unit with Remote unit manual scan
testing function:
1.Press “ TEST” button for three seconds until pin #1
LED lights up, pin #2 ~ 19pin＋Shield LEDs light up
step by step sequentially after pressing “ TEST” button
and sustained repeating.
2.The test result please refer to the slow continuity
scan testing function. (Fig 7. ~ Fig 10.)
3.Press “ TEST” button three seconds again then go
back to automatic testing mode.