Vitek VT-3606 - Manual (Page 8)

When the signal level is higher than the signal
reception threshold, the radio stays tuned to
that preset station for 5 seconds and then con-
tinues scanning.
When pressed for more than 1 second, the fre-
quencies of the 6 radio stations with the
strongest signals will be saved into the preset
memories. You must use the preset buttons (4)
to select one of these stations.
When the AS operation has ended, the radio will
conduct a scan of preset stations.
13.SCANNING
This button works like a radio scanner. Operating
in this mode is like a usual search, except that a
5 second delay occurs at each station found in
the RADIO SCAN mode.
14.MUTE BUTTON
Press this button to quickly turn off the sound.
Press it again to return to the previous volume
level.
15.LIQUID CRYSTAL SCREEN
The liquid crystal screen displays the current
status of the device.
LOCATION OF CONTROLS FOR THE CD/MP3
PLAYER
11.FORWARD/BACK TRACK SEARCH
Press the SKIP (: or 9) buttons during play-
back to switch to the desired track (song).
BACK 9 FORWARD :
Press and hold the SKIP (9 or :) buttons dur-
ing playback to listen to the disk at high speed.
Upon finding the desired place on the disc,
release the button. Normal playback will be
restored. When the CD/MP3 disc ends, the sys-
tem automatically switches to radio mode.
17.CD DISC SLOT
18.EJECTING DISCS (“EJ”)
Press the EJECT button to remove the CD.
19.PAUSE MODE (“PAU”)
Press the PAU button during playback to tem-
porarily stop playback. Press it again to continue
playback.
20.INTRO MODE PLAYBACK (Preliminary play-
back of all tracks)
When this button is pressed, the INT ON indica-
tor appears on the display and each track on the
disc is played for several seconds. Press this
button again to stop intro mode playback and
listen to the current track.
21.REPEAT PLAYBACK BUTTON ‘RPT’
When this button is pressed, the RPT ON indica-
tor appears on the display and the current track
will be repeated non-stop until the repeat mode
is deactivated by pressing the RPT button again.
22.RANDOM PLAYBACK MODE ‘RDM’
When this button is pressed, the RDM ON indi-
cator appears on the display and each track on
the disc will be played in random order – not
sequential order. Press the RDM button again to
deactivate the RANDOM playback mode.
23, 24. Selecting 10 tracks up/down: (For MP3
discs)
23: 10 tracks down / 24: 10 tracks up
CHOOSING MP3 FILES
1. Searching for a track:
• Press the “A/PS” button to activate the track
search.
• Press the “SEL” button; the first number will start
to blink.
• Use the VOL / VOL knob to choose the
first number of desired track.
• Press “SEL” to set the first number; the second
number will start to blink.
• Use the “VOL / VOL” knob to choose
the 2nd and 3rd number accordingly.
• The desired track will automatically be played.
2. File name search:
• Press ‘A/PS’ twice; file search mode will be acti-
vated.
• Press ‘SEL’; the first directory is displayed.
• Use the VOL / VOL knob to choose the
desired directory.
• Press ‘SEL’ again to set the directory; the first
file name in the chosen directory will be dis-
played.
• Use the ‘VOL / VOL’ knob to choose the
desired file.
• Press ‘SEL’ to begin playback of the chosen
song.
3. Symbol search:
• Press the ‘A/PS’ button 3 times; the symbol
search mode will be activated.
• Press the ‘SEL’ button; the symbol ‘A’ will be dis-
played.
• Use the VOL / VOL knob to choose the
desired letter.
• Press the ‘SEL’ button for more than 2 seconds.
• All songs whose name contains that symbol will
be displayed.
ENGLISH
8
3606_4l.qxd 29.03.05 13:40 Page 8