Oakworks Antigua - Manual (Page 13)

DIRECTIONS FOR USE
Hand Control: 6 positioning Buttons or 4 positioning Buttons
The Hand Control on the Antigua ™ operates all the customizable positioning
of the backrest, leg rest and height.
6
DIRECTIONS FOR USE
• Adjusting Height and Top Positions of the Antigua ™ using the Hand Control
Antigua ™
Do not sit on the elevated
Back Rest or Leg Rest.
Press and hold the appropriate button until the position desired is
achieved and then release. The arm rests will adjust automatically to
provide the most in comfort and ergonomics while staying parallel
to the floor, no matter what the position.
• Hand Control
Back Rest Control:
activates backrest
down to level position
Children must be supervised
when around this equipment
by a responsible adult. Do not
leave children alone or allow
them to operate the controls.
Do not allow children to crawl
into the cabinet or under the
table. Back Rest Control:
activates backrest
When operating the
Antigua ™ controls be
sure to observe all cautions
and warnings given in the
manual to prevent injury to
both operator and client.
DO NOT use the hand
control and the foot control
simultaneously as this can
cause damage to one or
both units.
IMPORTANT 
HAND CONTROL OPERATIONS
CAUTION
CAUTION
Height UP Control:
raises table height
Height
DOWN Control:
lowers table height
Leg Rest
UP Control:
elevates leg rest
Leg Rest
DOWN Control:
lowers leg rest to
level position
If your table
does not have a
leg rest section,
you will have a
four button hand
control, controling
the backrest and
height adjustments.