Caution, Important, Troubleshooting – Oakworks Antigua User Manual

Page 22: Controls

Advertising
background image

TROUBLESHOOTING

I

F

THE

A

NTIGUA

WILL

NOT

CHANGE

HEIGHT

OR

POSITION

:

• Check that the keyswitch inside the table is in the “on” position.
• Check the outlet to be sure that it has power and that the power

cable is plugged in. Try each Foot Control and Hand Control to see

if any work. If any work, then possibly there is a loose connection or a

faulty controller.

• Unplug the power cable from the wall outlet.

• Make sure that all male and female connectors are firmly pushed

into each other. Even a slight misconnection can cause a possible

malfunction.

• Plug the unit back into the wall and check the controls

again. If one or more of the controls still do not work, contact

Customer Service at 800-558-8850 to arrange replacement.

TROUBLESHOOTING

The table weighs as much
as 200 lbs. DO NOT lift or
move the unit without using
proper safety procedures
or equipment. DO NOT turn
the

Antigua™

on its side for

any reason. To do so could
cause damage to the base
and will void the warranty.
There are no serviceable
items that require this action.
Never lift the table by grasp-
ing the table top as the
table top is not

designed to

hold the weight of the base
and you could damage the
table.

Before doing any work on the
unit,disconnect the power
cord from the power outlet.

Be sure to read all

cautions, warnings

and instructions given

in the manual to prevent
injury to both operator
and client.

Controls

IMPORTANT

15

TROUBLESHOOTING

• If

Antigua™

will not Change Height or Position

CAUTION

CAUTION

I

F

THE

A

NTIGUA

IS

MAKING

NOISE

DURING

HEIGHT

ADJUSTMENT

• If you hear squealing or a pop during the height adjustment, this

may be related to lack of lubrication in the hydraulic cylinders. We

recommend that you immediately cycle the table fully up/down

at least seven times. If this does not work, then let the motor cool

down for at least two hours and repeat the procedure. The table

should return to its normal quiet mode. Refer to “DIRECTIONS

FOR USE; Important for continued quiet operation.”

Advertising