Registering coded speed dialing numbers and names – Canon B45 User Manual
Page 35
2
PREP
A
RING TO USE YOUR F
AX
2-13
Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone
number up to 50 digits can be registered under each two-digit speed dialing code (01-50) and you
can register up to 50 locations. You can also register the name of the party (up to 16 letters) and a
voice tag; the name appears on the printout of the coded speed dialing list.
Registering coded speed
dialing numbers and names
1
Press [Function].
2
Use [3] or [4] to select TEL REGISTRATION.
▼
Press [Start/Copy].
1-TOUCH SPD DIAL
3
Use [3] or [4] to select CODED SPEED DIAL.
▼
Press [Start/Copy].
A01=
4
Use [3] or [4] to select the two-digit code under which you want to register the number.
If a number is already registered under this coded speed dialing code, the number is displayed on the
LCD.
5
Enter the party’s number and name the same way you registered them for one-touch speed
dialing.
See steps 5 to 6, Registering one-touch speed dialing numbers and names, p. 2-11.
A03=81 773 xxxx_
6
Register the party’s voice tag the same way you registered it for one-touch speed dialing
(see pp. 2-11, 2-14).
7
To assign additional coded speed dialing numbers, start from step 4.
To finish, press [Stop].
n
To delete the name and number registered under the coded speed dialing code, press [Clear] and
[Start/Copy] after you perform steps 1 to 4 above.