Canon B45 - Manual (Page 84)

7-2
(Default settings are shown in bold type.)
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE # MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
LINE MONITOR VOL
CALLING VOLUME
ALARM VOLUME
KEYPAD VOLUME
RX CALL LEVEL
TEL LINE TYPE
AUTO VOICE DIAL
–
–
–
–
INSIDE IMAGE/
OUTSIDE IMAGE
FAX/TEL
STANDARD/DARKER/
LIGHTER
ON/OFF
–
0 (off)/1/2/3
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
ON/OFF
USER SETTINGS
Name Description Settings
Set the date and time (24-hour clock) using the numeric
buttons.
Enter your fax number using the numeric buttons.
This is the name that appears at the top of each fax page
you send (see p. 2-7).
This option sets the parameters for the identification
header that appears on every page you send.
Select the position of the TTI.
Select the icon for the fax number.
Set the density of the reproduction.
Enable/disable the off hook alarm. The alarm alerts you
that the handset is not seated properly in its cradle.
Set the volume of the fax sounds.
Set the volume of the line monitor (sound during dialing).
Set the volume of the ring produced when the fax detects a
voice call during FAX/TEL switchover.
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the ring tone.
Set the dialing method the fax uses to match the type of
phone line you have.
Enable/disable automatic dialing for voice dialing.