Cingular X-C 6250 Pro (300) - Manual (Page 69)

69
Section 6. Managing Batteries and Power
79-0030-001 11 January 2001
MaxBright
MaxBright is a feature available on 10.4-inch color display that
intensifies the backlight to its maximum brightness. Pressing FN+F1
toggles MaxBright on and off. The system automatically turns off
MaxBright after a period of inactivity, and this time-out setting can be
changed in the System Configuration Utility (SCU). See Section 5,
“Customizing Settings,” for information about accessing the SCU.
Cycle Discharging” later in this section.
To learn more about this program, refer to its online help.
Removing and Replacing Batteries
Replace the battery in your computer with a new one if your existing
battery does not hold a charge. If your battery is drained, replace it
with a charged one. When operating on battery power, the computer is
equipped with enough internal backup power to maintain memory
contents for about 5 minutes each time you exchange batteries.
CAUTION You can lose data if you remove the battery while the
mobile computer is operating on battery power. Turn off the
computer by pressing FN+OFF before you remove the battery. You
can also lose data if the battery is removed from the unit for more
than 5 minutes.