OmniSistem Beta 3 – EQ2231 - Manual (Page 10)

6. Power requirement
8
2 3 0 V 1 1 5 V
Please make sure the local power voltage is same as the back panel indicates before
connect the power socket.
There is a power voltage choose switch can suitable for lots of power net.
Please check whether the local power voltage is same as the voltage choose switch
115V/230V indicates or not ,and if same it can be connected .If not, please adjust the
voltage choose switch to the voltage same as local voltage. Please note: To change
the selection switch must be under the condition of power off.
The power voltage choose switch are as the below picture:
work under 220V work under 110V
Please confirm the socket and the power cable are in good condition before connect
the machine to the power socket. Please pull out the plug after turn off the machine.
The machine's normal working power is about 30VA.
Please change the suitable fuse if change the voltage setting.