Т³гж 9, Back panel introduction – OmniSistem Beta 3 – EQ2231 User Manual
Page 9
5. Back panel introduction
7
VOLTAGE
SELECT
BALANCED CONNECTIONS
OUTPUT-B
INPUT-B
Tip+(Hot) Ring-(cold)
Pin2+(Hot) Pin3-(cold)
BALANCED CONNECTIONS
Tip+(Hot) Ring-(cold)
Pin2+(Hot) Pin3-(cold)
115/230VAC 50/60Hz30VA
Elder Audio Manufacture Co., Ltd
NO.
OUTPUT-A
INPUT-A
T500mAL 250V
1
2
3
4
5
6
1.Power input socket
2.Voltage select switch. there is a option for 115V and 230V.please select according to
local voltage.
3.Channel A signal input connector. we've provided three different interface connectors:
XLR-type,1/4" TRS jack and Phoenix/Combicon screw terminals. All the inputs are
electronically balanced and parallel connected.
4. Channel A signal output connector. we've provided three different interface connectors:
XLR-type,1/4" TRS jack and Phoenix/Combicon screw terminals. All the outputs are
electronically balanced and parallel connected.
5.Channel B signal input connector. we've provided three different interface connectors:
XLR-type,1/4" TRS jack and Phoenix/Combicon screw terminals. All the inputs are
electronically balanced and parallel connected.
6. Channel B signal output connector. we've provided three different interface connectors:
XLR-type,1/4" TRS jack and Phoenix/Combicon screw terminals. All the outputs are
electronically balanced and parallel connected.