Cisco IP Phone 7961G-GE - Manual (Page 7)

4-7
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager
OL-11528-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
• Unlocking and Locking Options, page 4-4
• Editing Values, page 4-4
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings.
Table 4-2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-2 .
Before you can change an option on this menu, you must unlock options as
described in the
“Unlocking and Locking Options” section on page 4-4 . The Edit,
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page 4-4 .
Table 4-2 Network Configuration Menu Options
Option Description To Change
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone obtains
its IP address. Display only—cannot configure.
BOOTP Server Indicates whether the phone obtains
its configuration from a Bootstrap
Protocol (BootP) server instead of
from a DHCP server. Display only—cannot configure.
MAC Address Unique Media Access Control
(MAC) address of the phone. Display only—cannot configure.
Host Name Unique host name that the DHCP
server assigned to the phone. Display only—cannot configure.