Internet setup (basic settings), However, Internet – On Networks N150R User Manual User Manual
Page 20: Setup (basic settings)
Router Setup
20
N150 WiFi Router (N150R)
Internet Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the router menu. It is where you view or
change ISP information. The fields that display vary depending on whether your Internet
connection requires a login.
To manually set up the Internet connection:
1.
Select Setup > Internet,
2.
Select Yes or No depending on whether your ISP requires a login.
•
Yes
. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
•
No
. Enter the account and domain names, as needed.
3.
Enter the settings for the IP address and DNS server. The default DSL settings usually work
fine. If you have problems with your connection, check the ISP settings.
4.
If no login is required, you can specify the MAC Address setting.
5.
Click Apply to save your settings.
6.
Click Test to test your Internet connection. If you are not able to connect within 1 minute,
.
The following descriptions explain all of the possible fields in the Basic Settings screen. The
fields that display in this screen depend on whether an ISP login is required.
Does Your ISP Require a Login?
Answer either yes or no.
•
When no login is required, these fields display
: