On Networks N150R User Manual - Manual (Page 34)

Router Setup
34
N150 WiFi Router (N150R)
b. In the Connection Type list, select either TCP, UDP, or both (TCP/UDP). Specify the
port number or range of port numbers that the application or game uses.
7. From the Priority list, select the priority for Internet access for this traffic relative to other
applications and traffic. The options are Low, Normal, High, and Highest.
8. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
QoS for a Router LAN Port
 To create a QoS policy for a device connected to one of the router’s LAN ports:
1. Select Setup > Quality of Service to display the QoS Setup screen. Select the Turn
Internet Access QoS On
check box.
2.
Click the Setup QoS Rule button.
3. Click the Add Priority Rule button.
4. From the Priority Category list, select Ethernet LAN Port.
5. From the LAN port list, select the LAN port.
6.
From the Priority list, select the priority for Internet access for this port’s traffic relative to
other applications. The options are Low, Normal, High, and Highest.
7. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
8. In the QoS Setup screen, click Apply.
QoS for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select Setup > Quality of Service, and click the Setup QoS Rule button. The QoS
Setup screen displays.
2.
Click Add Priority Rule.
3. From the Priority Category list, select MAC Address:
4. If the device is the MAC Device List, select its radio button. The information from the MAC
Device List populates the policy name, MAC Address, and Device Name fields. If the device
is not in the list, click Refresh. If it still does not appear, fill in these fields manually.