On Networks N300R User Manual

Page 10

background image


2. Look for the preset On Networks WiFi network name (SSID), and

select it.The preset WiFi network name (SSID) is located on the
product label on the bottom of the router.

Note: If you changed the name of your network during

the setup process, look for that network name.

3. Enter the preset WiFi network password (or your custom

password if you changed it), and click Connect.

4. Repeat steps 1–3 to add other wireless devices.

WPS Method

If your wireless device supports WPS (Wi-Fi Protected Setup), you
might be prompted to press the WPS button on the router instead of
entering the WiFi network password. If this happens:

1. Press the WPS button on the router.
2. Within 2 minutes, press the WPS button on the client device, or

follow the WPS instructions that came with your wireless device
to complete the WPS process. The device will then be
connected to your router.

3. Repeat this process to add other wireless devices.

Note: WPS does not support WEP security. If you try

to connect a WEP client to your network using
WPS, it will not work.