Preset wireless security – On Networks N300R User Manual

Page 7

background image


You can use an Ethernet cable (not included) or connect wirelessly.
• Use the Ethernet cable to connect your computer to an Ethernet

port on your router. If you are using a fixed IP address, be sure

the LAN port is set to DHCP before connecting. (The default IP

address is

• Or, connect wirelessly by using the preset wireless security

settings located on the label on the bottom of the router. (See the

Preset wireless security section for details.)

5. Launch


browser. If a web page does not open, close and reopen

the browser and type in the address

bar. Click the Setup tab and follow the steps to set up your router.

Preset wireless security

This product has a unique WiFi network name (SSID) and WiFi

network password (Network Key). The default SSID and network key

(password) are uniquely generated for every device (like a serial

number), to protect and maximize your wireless security. This

information is located on the label on the bottom of the product.

Note: When you configure the wireless

settings of this device, be sure to

select the correct country settings.

The country settings must be identical

to the country where the device is