Cable Electronics HSW44C - Manual (Page 10)

9
IR Cables
IR Emitter Cable IR Receiver Cable
IR Sockets
HSW44C
IR Main : The default location for IR emitter extension cable to transmit all IR command signals received from any
of the four remote receivers to all of the HDMI sources.
IR1 : IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 1.
IR2 : IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 2.
IR3 : IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 3.
IR4 : IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 4.
HSMR
IR : IR receiver cable connected here can receive all IR command signals from the IR remote controls of HSW44C
and all other HDMI source machines.
IR Extender