Cable Electronics HSW44C - Manual (Page 18)

17
Warning!
There could be unexpected consequences resulted from inappropriate firmware update
operation. Please do it with caution.
1. Please unzip the Matrix_Firmware_Update.zip into your designated folder.
2. Please turn off the power of the HSW44C and set DIP location of [SW Main] at Pin#1-ON( ), Pin#2-ON( ),
Pin#3-OFF( ), & Pin#4-OFF( ).
3. Please execute the file Matrix_Firmware_Update.exe
4. In the pop-up window, at [Select Chip], please select W78E365.
5. In the pop-up window, at [Select File], please choose the BIN file in the designated folder, as shown in the
picture.
Firmware Update