Compaq OSI/FTAM D43 - Manual (Page 78)

Compaq FTAM Responder Diagnostic Messages
OSI/FTAM Responder Manual — 425199-001
A -10
Selection-Related Diagnostic Messages
Effect. The association is not established. The responder generates the password-fail
event (event number 20).
Recovery. For the first cause, the application or FTAM user should retry the request
using a valid password; for the second cause, the Compaq problem solver should correct
the default password by reconfiguring the DEFUSER attribute in the responder’s VFS
profile on the Compaq system.
2021
Cause. The responder can return this diagnostic message in two conditions:
•
In examining the initiate indication, the responder detected either a value of
unconstrained for the service class or no value at all for the service class.
•
The remote initiator requested services requiring the management service class, but
the management service class was not negotiated on the F-INITIALIZE request.
Effect. For the first cause, the association is not established. For the second cause, the
responder aborts the association.
Recovery. The application or FTAM user should reestablish the association negotiating
values for service class and functional units that are valid for the responder and that
support the requests being made.
Selection-Related Diagnostic Messages
Table A-6 displays the diagnostic error identifiers generated while selecting a file or
negotiating a service.
Incompatible service classes