Compaq OSI/FTAM D43 - Manual (Page 93)

Compaq FTAM Responder Diagnostic Messages
OSI/FTAM Responder Manual — 425199-001
A -25
Recovery-Related Diagnostic Messages
5040
Cause. The Compaq FTAM responder received a request with a FADU-lock parameter
on a read or write service. The Compaq FTAM responder does not support the FADU-
lock parameter.
Effect. The responder cancels the request. The association is left in a data-transfer idle
state.
Recovery. The application or FTAM user should issue a cancel response, and then
retry the read and write service omitting the FADU-lock parameter.
Recovery-Related Diagnostic Messages
Table A-11 displays the diagnostic error code that may be generated during recovery
operations
.
6010
Cause. Recovery has not been set to none (0) on the open request to the responder.
Effect. The responder rejects the open request because none (0) is the only recovery
value Compaq supports.
Recovery. The application or FTAM user should set recovery to none (0) and retry the
open operation.
FADU locking not available on file
Table A-11. Recovery-Related Diagnostic Messages
Identifier Type Observer Source Meaning
6010 2 5 1 Recovery mode not available
Recovery mode not available