Compaq OSI/FTAM D43 - Manual (Page 70)

Compaq FTAM Responder Diagnostic Messages
OSI/FTAM Responder Manual — 425199-001
A- 2
General FTAM Diagnostic Messages
The detailed descriptions of the diagnostic messages that follow each summary table are
also listed numerically by the error identifier. In addition to the information provided in
this appendix, responder diagnostic messages might also contain text of up to 256
characters in the Further Details fields, providing additional information on the nature of
the problem.
General FTAM Diagnostic Messages
Table A-3 displays the general error identifiers returned by the Compaq FTAM
responder.
1
Cause. Either the combination of a small maximum-string-length value and a large
PDU size caused the incoming data to exceed the responder’s data buffer capacity, or an
internal software error has occurred in the responder.
Table A-2. Sources and Observers of Errors
Source/Observer
Identifier
Description
0 Source of the error cannot be identified. This identifier is not valid for
the observer.
1 Initiating file-service user (initiating application).
2 Initiating file protocol machine.
3 Service supporting the protocol machines. This identifier is not valid
for the observer.
4 Responding file protocol machine.
5 Responding file-service user (VFS or file system).
Table A-3. General FTAM Diagnostic Messages
Identifier Type Observer Source Reason
1 2 5 5 Unspecific responder error
7 0 5 1 Unspecific initiator error
8 1 4 4 Subsequent error
9 2 4,5 4,5 Temporal insufficiency of
resources
Unspecific responder error