Industry standards, Indicator and port specifications – Cisco 4948 User Manual

Page 8

Advertising
background image

© 2005 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 8 of 14


•

BGP4-MIB

•

CISCO-BULK-FILE-MIB

•

CISCO-CLASS-BASED-QOS-MIB

•

CISCO-FTP-CLIENT-MIB

•

CISCO-HSRP-MIB

•

CISCO-IGMP-FILTER-MIB

•

CISCO-IPMROUTE-MIB

•

CISCO-PORT-SECURITY-MIB

•

CISCO-RMON-CONFIG-MIB

•

CISCO-VTP-MIB

•

ETHERLIKE-MIB

•

EXPRESSION-MIB

•

CISCO-PORT-STORM-CONTROL-MIB

•

IS-IS MIB

•

RIP SNMP MIB

Industry Standards

•

Ethernet—IEEE 802.3 and 10BASE-T

•

Fast Ethernet—IEEE 802.3u, 100BASE-TX, and 100BASE-FX

•

Gigabit Ethernet—IEEE 802.3z and 802.3ab

•

IEEE 802.1D Spanning Tree Protocol

•

IEEE 802.1w rapid reconfiguration of spanning tree

•

IEEE 802.1s multiple VLAN instances of spanning tree

•

IEEE 802.3ad LACP

•

IEEE 802.1p class-of-service (CoS) prioritization

•

IEEE 802.1Q VLAN

•

IEEE 802.1x user authentication

•

X2 support

•

RMON I and II standards

Indicator and Port Specifications

•

System status—Green (operational); red (faulty)

•

Console—RJ-45 female

•

Reset (switch recessed protected)

•

Uplinks—Link and active

•

Image management port—10/100BASE-TX (RJ-45 female) data terminal equipment (DTE); green (good); orange (disabled); off (not connected)

Advertising