Set power-on default, Save card defaults, Restore card defaults – Carrier Access Broadmore 1750 User Manual

Page 186

Advertising

7-72

Broadmore 1750 - Release 4.6

Configuration

System Configuration

Set Power-on Default

Select Save Config. for PowerUp to save a particular configuration for system
power-up. Select Save Config. for PowerUp as shown below to retain the current
configuration for PowerUp.

Save Card Defaults

Select Save Card Defaults to save the default configuration for the specific card.

Restore Card Defaults

Select Restore Card Defaults to restore the default configuration for the specific
card. This selection causes the following actions:

Deletes all existing connections

Reads the configuration file and restores the card port settings

Reads the configuration file again and sets up any SVC/PVCs

Select System Management

↵

Select Configuration Files

↵

Select Save Config. For PowerUp

↵

Select System Management

↵

Select Configuration Files

↵

Select Save Card Defaults

↵

Select Slot

↵

Select 'Yes' to save the defaults

↵

Select System Management

↵

Select Configuration Files

↵

Select Restore Card Defaults

↵

Select Slot

↵

Select 'Yes' to restore the card defaults

↵

Advertising