Glass-ceramic specifications, Glass replacement, Gasket specifications – Country Flame Bayvue DV 30 User Manual

Page 35

Advertising
background image

GLASS-CERAMIC SPECIFICATIONS

KERA LITE

®

glass-ceramic is specially manufactured for use in high temperature applications. This glass-

ceramic has a thermal endurance far exceeding that of normal tempered glass. KERA LITE

®

is designed to

operate at temperatures ranging from -400

0

F to +1400

0

F. Despite its superior thermal properties, KERA

LITE

®

stove windows should be treated with care. This glass-ceramic can still be scratched or broken by

mechanical abuse. When cleaning the window, use only non-caustic, non-abrasive cleaners. Country
Flame gas fireplace doors use a KERA LITE

®

glass-ceramic that is 0.197 inches thick +/- 0.008 inches.

Country Flame custom cuts each KERA LITE

®

glass at its factory to fit the fireplace door. If problems

occur or should the glass-ceramic ever need replacement, contact Country Flame or a local authorized
dealer for assistance. The glass-ceramic specifications are as follows:

Manufacturer

Euro Kera

Window

Type

Glass-Ceramic,

Kera

Lite

®

GLASS REPLACEMENT

1.

Turn off gas valve.

2. Unlock four door latches (2 each side), refer to door installation section and FIGURE 23.

WARNING

: Once door latches are unhooked, nothing holds door assembly to Bayvue DV. Do not

let the door assembly drop, handle with care.

3.

Remove the door assembly from the Bayvue DV guide pins and lay it on a padded flat surface.

4.

From the inside of the door remove the door rope gasket, FIGURE 22, left view, Item E. Undo twenty
#6 nuts and four #10/32 screws, FIGURE 22, right view, Item J that holds glass retainer strips in place.
Store all loose parts in a safe location as they will be required during reinstallation. Remove the glass
retainers, FIGURE 22, right view, Item I.

WARNING:

Broken glass is extremely sharp. Use extreme

caution. Use leather gloves and wear safety glasses when removing broken glass.

















FIGURE 22: GLASS REPLACEMENT

GASKET SPECIFICATIONS

GASKET

_____

LENGTH

QUANTITY

DESCRIPTION

BAYVUE DOOR SYSTEM
Fiberglass tape side glass

36”

2

¾” by 1/16” fiberglass tape

Fiberglass tape center glass

41”

1

¾” by 1/16” fiberglass tape

Rope gasket, front door

88”

1

3/4” diameter rope, high density

Version 1.0h

34

Advertising
This manual is related to the following products: