Carrier Access Adit 3500 - Manual (Page 31)

Adit 3500 - Release 1.6 31
Quick Start Guide
Basic Configuration
Configure WAN Interface for Internet Connectivity
There are options to this WAN configuration. This is the connection to the end user’s internet provider.
It can be the following:
z
Single T1 (PPP)
z
Multiple T1s (Multilink)
z
Ethernet WAN
Single T1 (PPP)
To configure a single T1 utilizing PPP:
1. Select Network Connections from the Navigation bar.
2. Select (click) a T1 Interface (from T1 1 - T1 4) to configure, T1 1 is recommended.
Note: Using T1 1 and the preconfigured Serial 1 makes this configuration very simple. If you
use T1 2-T1 4, you will need to delete the preconfigured Serial 1 and make a New Connection
(Serial 1) based on the T1 2-T1 4 that you selected.