Carrier Access Adit 3500 - Manual (Page 8)

8 Adit 3500 - Release 1.6
Quick Start Guide
Installation
Ferrite Beads
The following ferrite bead is required on the Adit 3500 configurations that do not have the FXS 4
channel option. The ferrite bead will enable the Adit to be compliant with EMI standards FCC Part 15
and ICES-003 Class A.
Ferrite beads shipped with Adit chassis:
For additional information on Ferrite beads and their installation on the Adit 3500, please contact
Carrier Access Customer Support at (800) 786-9929.
Ferrite Provided Part Number Intended For
1 large P/N 010-0051 Power cable, which requires a loop through the bead (see
drawing).
12V Power
Cord
Loop
through
Ferrite
Bead
Ferrite
Bead
Back of
Adit 3500