Canon A620 - Manual (Page 6)

4
„ Setting the Date/Time
1. Press the power button (a).
2. Use the
or button to select an item and the or
button to change its value (b).
3. Confirm that the correct time is displayed and press the
FUNC./SET button (c).
The date and time can also be set in the Set up menu (p. 13).
„ Setting the Display Language
1. Set the mode switch to (playback).
2. Hold down the FUNC./SET button and press the MENU
button.
3. Use the , , or button to select a language and
press the FUNC./SET button.
The display language can also be set in the Set up menu (p. 13).
• A rechargeable lithium battery is built into the camera
to save such settings as the date/time. This battery
charges when the main batteries are in the camera.
When you purchase the camera, place the main
batteries in it for approximately four hours or use AC
Adapter Kit ACK600 (sold separately) to charge the
lithium battery. It will charge even if the camera is
turned off.
• The date/time settings may be lost after approximately
three weeks if you remove the main batteries. Reset
the date/time settings if this occurs.
100-BasicGuide.fm Page 4 Thursday, June 23, 2005 1:51 PM