Casio MA0611-EC - Manual

Operation Guide PQ-60
1
MA0611-EC
ILLUSTRATION
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Current time
(Hour, minutes)
Day of the week Current
temperature
Date (month – day)
PM indicator Alarm indicator
Alarm time
Snooze on indicator
Alarm on indicator
Alarm Off HOUR (MONTH) or MIN (DATE)
button depressed
Snooze Alarm On
GENERAL GUIDE
1 1 1 1 1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 12/24 (YEAR) button
• Press this button to toggle between 12-hour and 24-hour timekeeping.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.
The day of the week is adjusted by the clock automatically in accordance with the date.
Hour
PM indicator
Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
minute setting.
Press to advance the
hour setting.
Year
Day Month
Press to advance the
year setting.
The day of the week is
adjusted automatically.
Press to advance the
day setting.
Press to advance the
month setting.
3 3 3 3 3 MIN (DATE) button
• Pressing this button while “TIME” is selected by the Mode switch 5 advances the minute setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.
4 4 4 4 4 HOUR (MONTH) button
• Pressing this button while “TIME” is selected by the Mode switch 5 advances the hour setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.
5 5 5 5 5 Mode switch
LOCK: For normal use
TIME: For adjusting the time setting
ALARM: For adjusting the alarm setting
CALENDAR: For adjusting the date setting
6 6 6 6 6 Alarm Mode selector
SNOOZE: Snooze alarm on
ON: Alarm on
OFF: Alarm off
7 7 7 7 7 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to “TIME”. This causes the current time to
flash on the display.
2. Use the 12/24 (YEAR) button 2 , MIN
(DATE) button 3 , and HOUR (MONTH)
button 4 to set the time. Holding down the
MIN (DATE) button 3 or HOUR (MONTH)
button 4 changes the corresponding setting
at high speed.
• Make sure you set the correct am/pm time if
you are using 12-hour timekeeping. The PM
indicator indicates PM times, while the AM
indicator indicates AM times.
• The seconds count automatically reverts to
00 whenever you finish adjusting the minute
setting.
3. Slide the Mode switch 5 to “CALENDAR”. This causes the current
date to flash on the display.
4. Use the 12/24 (YEAR) button 2 , MIN
(DATE) button 3 , and HOUR (MONTH)
button 4 to set the date. Holding down any
button advances the corresponding setting
at high speed.
• You can set the year in the range of 1990 to
2030. The day of the week is set
automatically in accordance with the date
setting.
5. Slide the Mode switch 5 to “LOCK”. This will cause the figures on the
display to stop flashing.