Chief Manufacturing Truss/Pole Static Mount TPS-2000 Series - Manual (Page 5)

Installation Instructions Model: TPS-2000 SERIES
5
Figure 9: Align Display
3. Secure display by placing the Q-Latch in the
"Latched" position (See Figure 10).
NOTE: A hole is provided in the Q-Latch and faceplate
to accommodate the insertion of a padlock or
similar locking device.
Figure 10: Close Q-Latch
ADJUSTMENTS
The TPS-2000 Series mount provides for limited roll
adjustment to level the display after installation.
To adjust display roll:
1. Loosen roll adjustment nuts. (See Figure 11)
2. Level Display.
3. Tighten roll adjustment nuts. (See Figure 11)
Figure 11: Display Roll Adjustment
Faceplate
Display
Mounting
Button
Faceplate
Display
Mounting
Button
Q-Latch
Faceplate
Display
LATCHED
Mounting
Button
2 deg.
View from back
(Mounting structure and hardware not shown)
Face Plate (20)
Truss Plate (10)
Roll Tension
Adjustment Nuts